Dreambox DM7000 DM7000 BIOS v.2.0 (Sep-22-2002) RAM: 48 MB, LCD: OK, CPU 252 MHz, BUS 63 MHz --- Device Configuration --- Power-On Test Devices: 000 Disabled System Memory [RAM] 002 Disabled Ethernet [ENET] ---------------------------- Boot Sources: 001 Enabled Application in Flash [FLASH] 002 Enabled Ethernet [ENET] local=0.0.0.0 remote=255.255.255.255 hwaddr=0009340023aa 003 Enabled Serial Port 1 [S1] Baud = 9600 ---------------------------- Update Flash : Disabled Automatic Boot: Enabled ---------------------------- 1 - Toggle Power-On Tests 2 - Change a Boot Device 3 - Change IP Addresses 4 - Ping test 5 - Change Baud Rate for S1 Boot D - Display Configuration 0 - Exit Menu and Boot Application ->0 trying 1 (1) Booting from [FLASH] Application in Flash... loaded at: 00500000 006141F8 relocated to: 00400000 005141F8 board data at: 00511128 00511168 relocated to: 00404BE4 00404C24 zimage at: 00405120 00510389 avail ram: 00515000 02000000 Linux/PPC load: console=ttyS0,115200 root=/dev/mtdblock/0 rw Uncompressing Linux...done. Now booting the kernel Linux version 2.4.20 (ghost@client) (gcc version 3.2.1) #5 Die Feb 25 02:32:01 CET 2003 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,115200 root=/dev/mtdblock/0 rw Console: colour dummy device 80x25 Calibrating delay loop... 251.49 BogoMIPS Memory: 29784k available (1900k kernel code, 592k data, 96k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket OCP uart ver 1.6.2 init complete Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-proc.o version 2.6.1 (20010825) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xe0040000 (irq = 20) is a 16550A ttyS01 at 0xe0000000 (irq = 21) is a 16550A ttyS02 at 0xe00e0000 (irq = 31) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx IBM IDE ocp driver version 2.2 ide_redwood: waiting for drive ready......Drive spun up hda: IBM-DTLA-307060, ATA DISK drive ide0 at 0xc307d1f8-0xc307d1ff,0xc307d1f6 on irq 25 hda: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=119150/16/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com) eth0: SMC91C11xFD(r:1) at 0xc3083300 IRQ:28 INTF: MEM:8192b NOWAIT:0 ADDR 00:09:34:00:23:aa SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 dreambox: flash mapping: 800000 at 7f800000 disable flash VPP Creating 5 MTD partitions on "DreamBOX rev3+": 0x00000000-0x00600000 : "DreamBOX cramfs" 0x00600000-0x007c0000 : "DreamBOX jffs2" 0x007c0000-0x00800000 : "DreamBOX OpenBIOS" 0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)" 0x00000000-0x00800000 : "DreamBOX (w/ bootloader)" usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xc3888000, IRQ 18 usb-ohci.c: usb-ocp, builtin usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice IBM On-chip iic (i2c) algorithm module 2002.30.04 iic_ibmocp_init: IBM on-chip iic adapter module i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 0 i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 0. i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 1 i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 1. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (cramfs filesystem). Mounted devfs on /dev Freeing unused kernel memory: 96k init init started: BusyBox v0.60.5 (2003.02.16-12:05+0000) multi-call binary Using /lib/modules/2.4.20/misc/fb.o Warning: loading fb will taint tfb: loaded he kernel: non-GPL license - proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modules Warning: loading fb will taint the kernel: forced load Console: switching to colour frame buffer device 90x36 pfb: fb0: Pallas frame buffer device Using /lib/modules/2.4.20/misc/sdev.o Warning: loadingsdev: Loading sdev module sdev will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modules Using /lib/modules/2.4.20/misc/dream.o Warning: loading dream will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modules i2c-core.o: driver DreamBOX frontprocessor registered. i2c-core.o: client [fp] registered to adapter [IBM OCP IIC adapter](pos. 0). fp: attaching fp at 0xee to adapter IBM OCP IIC adapter error occured: 43 incomplete xfer nack event: init ... CICCR:00800088 core: Loaded IBM STB04xxx core driver write 1 event's ... registering device. demux: inited xp0_clk_stop [XP1] Init [XP1] 896KBytes used for Queues i2c-core.o: driver stv0299 DVB demodulator registered. i2c-core.o: client [stv0299] registered to adapter [IBM OCP IIC adapter](pos. 1). registering frontend... already got one. i2c-core.o: driver Mitel tuner driver registered. i2c-core.o: client [Dreambox Tuner Driver] registered to adapter [IBM OCP IIC adapter](pos. 2). lcd.o: LCD driver (KS0713) module Using /lib/modules/2.4.20/misc/avs.o Warning: loading avs will taint i2c-core.o: driver DreamBOX AV-Switch registered. the kernel: non-i2c-core.o: client [avs] registered to adapter [IBM OCP IIC adapter](pos. 3). GPL license - pravs: attaching avs at 0x94 oprietary Seeto adapter IBM OCP IIC adapter http://www.tux.error occured: 43 org/lkml/#exportincomplete xfer -tainted for infnack ormation about tainted modules Warning: loading avs will taint the kernel: forced load insmod: ca.o: no module by that name found insmod: sci_drv.o: no module by that name found Using /lib/modules/2.4.20/misc/fb.o Warning: loading fb will taint the kernel: non-GPL license - proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modules Warning: loading fb will taint the kernel: forced load insmod: A module named fb already exists Using /lib/modules/2.4.20/misc/sdev.o Warning: loading sdev will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modules insmod: A module named sdev already exists Using /lib/modules/2.4.20/misc/dream.o Warning: loading dream will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modules insmod: A module named dream already exists Using /lib/modules/2.4.20/misc/avs.o Warning: loading avs will taint the kernel: non-GPL license - proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modules Warning: loading avs will taint the kernel: forced load insmod: A module named avs already exists insmod: ca.o: no module by that name found insmod: sci_drv.o: no module by that name found loadkmap: Error opening /dev/tty0: No such file or directory /dev/ide/host0/bus0/target0/lun0/disc: setting standby to 120 (10 minutes) /dev/ide/host0/bus0/target0/lun0/disc: setting acoustic management to 128 acoustic = 128 (128=quiet ... 254=fast) rdate: time.ien.it: Host name lookup failure VFS: Can't find ext3 filesystem on dev ide0(3,1). cramfs: wrong magic FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 03:01. Unable to identify CD-ROM format. reiserfs: checking transaction log (device 03:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 /etc/init.d/rcS: /bin/smbd: No such file or directory /etc/init.d/rcS: /bin/nmbd: No such file or directory Copying key-files from "/var/keys/" to "/var/tmp/". + (0) Configuration + (1) EAUDIO + (5) d-Box LCD Hardware + (5) eActionMapList + (9) Font Render Class + (10) gRC + (11) GFBDC + (15) skin subsystem + (20) RC Input layer + (21) DreamBox RC Hardware 2 + (21) d-Box RC Hardware + (25) eTextInputField + (25) eSlider + (25) eStatusBar + (25) eWindow + (25) eWidget + (25) eProgress + (25) eLabel + (25) eCheckbox + (25) eButton + (25) eChannelInfo + (30) number actions + (30) cursor actions + (30) focus actions + (30) list actions + (30) shortcut actions + (30) enigma helpwindow actions + (30) rotor menu actions + (30) enigma vcr actions + (30) timer view actions + (30) eset event: 00000008 pg selector actici-open ons + (30) enigma mainmenu actions + (30) service selector actions + (30) enigma main actionsdisable continuous tone + (30) enigma global actions set Voltage + (30) enigma standby actions + (30) enigma event view actions + (34) stream watchdog + (35) eDVB lib delay 25ms (0)commited command send delay 25ms after send last diseqc command do not enable continuous Tone FBLK:0 set_vsw1:5 open audio device open audio device FBLK:0 FNC:2 FNC:2 + (36) EPG cache + (40) eServiceInterface + (41) eServiceFileHandler + (41) eServiceStructureHandler + (42) eServicePlaylistHandler + (42) eServiceHandlerMP3 + (42) eServiceHandlerDVB + (44) Timer Manager reached rl 45 eth0: PHY=LAN83C183 (LAN91C111 Internal) /bin/nmbd: No such file or directory do not disable continuous tone (already off) set Voltage delay 25ms (0)commited command send delay 25ms after send last diseqc command do not enable continuous Tone do not disable continuous tone (already off) set Voltage delay 25ms (0)commited command send delay 25ms after send last diseqc command enable continuous tone set Voltage delay 25ms enable continuous tone + (50) wizard: language + (53) wizard: scan reached rl 70 open audio device VIDEO_PLAY / VIDEO_CONTINUE, state 0 VIDEO_FREEZE, state 1 ok, state now: 2 VIDEO_PLAY / VIDEO_CONTINUE, state 2 xp0_clk_start write 1 event's ... write event ... free found write event ... filter ok FNC:2 SoftCam.Key.new 100% |*****************************| 0 --:-- ETASoftCam.Key.new 100% |*****************************| 5174 --:-- ETASoftCam.Key.new 100% |*****************************| 7247 --:-- ETA keyupdate: Keys backed up and updated.